HA-80 FL Ex Windsock assembly internally lighted 115 Vac

Explosion proof, Zone 1

Description

HA-80 FL Ex Windsock assembly internally lighted 230 Vac.

Holland Aviation is making this assembly of Stainless Steel 316 as well as it has an explosion-proof internal lighting and top light. Therefore it makes suitable for the zone 1 area.

This assembly is only suitable for 230 Vac.

We have this installation internally lighted 24 Vdc, internally lighted 115 Vac, and internally lighted 230 Vac.

 

Some key features of the HA-80 FL Ex Windsock assembly are;
  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • This installation has low maintenance costs.
  • A reliable fixed illumination system.
  • The assembly has no rotating electric parts.
  • In addition, Holland Aviation is not using any mercury-containing slip-rings.

 

The Colours red/white (ICAO) as well as orange (FAA), double-stitched with a reinforced front hem and grommets. The Holland Aviation windsocks are designed so that they taper from the throat to the trailing end. As a result of this, the windsock is fully extending when you are exposing it to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves are proving to withstand wind speeds in excess of 145km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV resistance and color fastness by an independent laboratory.

 

Where to use windsocks

datasheet

Additional information

Mast material

SS AISI 316

Mast length

200 mm

Mounting Flange

SS 316

Mounting

NW 40, Ø 150 x 16 mm. Four holes 16 mm ABCD 110 mm

Swivel Bearings

2 Heavy Duty Stainless Steel Bearings

Internal Lighting

ML43d 8/2 460 115 Volt AC 2 x 8 Watt

Obstruction light

EVA, ATEX II 2 GD Ex d IIC T6/85 C°, T3/T200 C°

Power supply

115 Vac

Compliances

UK CAP 168, UK CAP 437, Atex zone 2 ATEX/IECEx II 3 G Ex nA IIC T5

  • Secure payment
  • Very competitively priced
  • Fast delivery
  • Standard shipping rates in Europe. Delivery outside Europe? Request a quote.

Description

HA-80 FL Ex Windsock assembly internally lighted 230 Vac.

Holland Aviation is making this assembly of Stainless Steel 316 as well as it has an explosion-proof internal lighting and top light. Therefore it makes suitable for the zone 1 area.

This assembly is only suitable for 230 Vac.

We have this installation internally lighted 24 Vdc, internally lighted 115 Vac, and internally lighted 230 Vac.

 

Some key features of the HA-80 FL Ex Windsock assembly are;
  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • This installation has low maintenance costs.
  • A reliable fixed illumination system.
  • The assembly has no rotating electric parts.
  • In addition, Holland Aviation is not using any mercury-containing slip-rings.

 

The Colours red/white (ICAO) as well as orange (FAA), double-stitched with a reinforced front hem and grommets. The Holland Aviation windsocks are designed so that they taper from the throat to the trailing end. As a result of this, the windsock is fully extending when you are exposing it to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves are proving to withstand wind speeds in excess of 145km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV resistance and color fastness by an independent laboratory.

 

Where to use windsocks

datasheet

Additional information

Mast material

SS AISI 316

Mast length

200 mm

Mounting Flange

SS 316

Mounting

NW 40, Ø 150 x 16 mm. Four holes 16 mm ABCD 110 mm

Swivel Bearings

2 Heavy Duty Stainless Steel Bearings

Internal Lighting

ML43d 8/2 460 115 Volt AC 2 x 8 Watt

Obstruction light

EVA, ATEX II 2 GD Ex d IIC T6/85 C°, T3/T200 C°

Power supply

115 Vac

Compliances

UK CAP 168, UK CAP 437, Atex zone 2 ATEX/IECEx II 3 G Ex nA IIC T5