HA-80 FL SS Windsock assembly internally lighted LED

 Stainless steel, internally lighted

Description

HA-80 RG SS Windsock assembly intern lighted.

The reliable illumination system (if present) is fixed and therefore has no rotating electric parts or slip-rings. Due to its unique design maintenance cost and power consumption are low. The tillable mast structure enables easy replacement of the windsock.

 

You can also buy the HA-80 RG SS unlighted

We use the finest European materials available for the making of our windsock assemblies

 

Some key features of the HA-80 RG SS Windsock assembly are;

  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a tilt-able mast therefore that it is easy to replace the windsock.
  • a reliable fixed illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-ring.

 

The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

 

Where to use windsocks

datasheet

Additional information

Mast material

SS AISI 316

Mast length

4800 mm

Mounting Flange

SS 316

Ingress Protection

Obstruction light IP 65

Power supply

6,6A, 90-240VAC

Compliances

ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR

  • Secure payment
  • Very competitively priced
  • Fast delivery
  • Standard shipping rates in Europe. Delivery outside Europe? Request a quote.

Description

HA-80 RG SS Windsock assembly intern lighted.

The reliable illumination system (if present) is fixed and therefore has no rotating electric parts or slip-rings. Due to its unique design maintenance cost and power consumption are low. The tillable mast structure enables easy replacement of the windsock.

 

You can also buy the HA-80 RG SS unlighted

We use the finest European materials available for the making of our windsock assemblies

 

Some key features of the HA-80 RG SS Windsock assembly are;

  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a tilt-able mast therefore that it is easy to replace the windsock.
  • a reliable fixed illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-ring.

 

The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

 

Where to use windsocks

datasheet

Additional information

Mast material

SS AISI 316

Mast length

4800 mm

Mounting Flange

SS 316

Ingress Protection

Obstruction light IP 65

Power supply

6,6A, 90-240VAC

Compliances

ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR