HA-80 FL SS Windsock assembly unlighted
Stainless steel unlighted
Description
HA-80 FL SS Windsock assembly unlighted.
Holland Aviation is making this assembly out of Stainless Steel 316. It has an explosion-proof internal lighting and top light.
The HA-80 FL SS windsock assembly is specially designed for installation on every possible required place.
Some key features of the HA-80 FL SS Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- This installation has low maintenance costs.
- This windsock assembly has a low power consumption.
- A reliable fixed illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings.
The Colours red/white (ICAO) or orange (FAA), double-stitched with reinforced front hem and grommets. Our windsocks are designed so that they taper from the throat to the trailing end, as a result, the windsock is fully extending when you are exposing it to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves are proving to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
Mast material | SS AISI 316 |
---|---|
Mast length | 200 mm |
Mounting Flange | SS 316 |
Mounting | NW 40, Ø 150 x 16 mm. Four holes 16 mm ABCD 110 mm |
Windsock frame material | SS AISI 316L |
Compliances | ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR |
- Secure payment
- Very competitively priced
- Fast delivery
- Standard shipping rates in Europe. Delivery outside Europe? Request a quote.
Description
HA-80 FL SS Windsock assembly unlighted.
Holland Aviation is making this assembly out of Stainless Steel 316. It has an explosion-proof internal lighting and top light.
The HA-80 FL SS windsock assembly is specially designed for installation on every possible required place.
Some key features of the HA-80 FL SS Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- This installation has low maintenance costs.
- This windsock assembly has a low power consumption.
- A reliable fixed illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings.
The Colours red/white (ICAO) or orange (FAA), double-stitched with reinforced front hem and grommets. Our windsocks are designed so that they taper from the throat to the trailing end, as a result, the windsock is fully extending when you are exposing it to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves are proving to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
Mast material | SS AISI 316 |
---|---|
Mast length | 200 mm |
Mounting Flange | SS 316 |
Mounting | NW 40, Ø 150 x 16 mm. Four holes 16 mm ABCD 110 mm |
Windsock frame material | SS AISI 316L |
Compliances | ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR |