Holland Aviation
Request quote
Home Shop HA-80 RG Ex Windsock assembly internally lighted 24 Vdc
HA-80 RG Ex Windsock

HA-80 RG Ex Windsock assembly internally lighted 24 Vdc

Explosion proof, Zone 1

Add to quote

Description

HA-80 RG Ex Windsock assembly internally lighted 24 Vdc

Holland Aviation is making this assembly out of Stainless Steel 316 and it has an explosion-proof internal lighting and top light.

 

You can also buy the HA-80 RG Ex  115 Vac as well as 230 Vac.

 

Some key features of the HA-80 RG Ex Windsock assembly are;
  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a tilt-able mast for easy replacement of the windsock.
  • a reliable illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-rings.

 

Holland Aviation’s windsocks are designed so that the taper from the throat to the trailing end causes the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

Where to use windsocks

More products

Datasheet

Additional information

Mast support material

SS 316
Mast material

SS 316
Mast length

4800 mm
Mast diameter

76,1 mm
Swivel Bearings

2 Heavy Duty Stainless Steel Bearings
Windsock frame material

SS AISI 316L
Internal Lighting

Thuba GB 34 20 0385
Power supply

12-370 VDC, 85-265 VAC
Obstruction light

EatonAB50 SPG1N
Compliances

UK CAP 168, UK CAP 437, Atex zone 2 ATEX/IECEx II 3 G Ex nA IIC T5

Related products

  • Secure payment
  • Very competitively priced
  • Fast delivery
  • Standard shipping rates in Europe. Delivery outside Europe? Request a quote.

Description

HA-80 RG Ex Windsock assembly internally lighted 24 Vdc

Holland Aviation is making this assembly out of Stainless Steel 316 and it has an explosion-proof internal lighting and top light.

 

You can also buy the HA-80 RG Ex  115 Vac as well as 230 Vac.

 

Some key features of the HA-80 RG Ex Windsock assembly are;
  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a tilt-able mast for easy replacement of the windsock.
  • a reliable illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-rings.

 

Holland Aviation’s windsocks are designed so that the taper from the throat to the trailing end causes the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

Where to use windsocks

More products

Datasheet

Additional information

Mast support material

SS 316
Mast material

SS 316
Mast length

4800 mm
Mast diameter

76,1 mm
Swivel Bearings

2 Heavy Duty Stainless Steel Bearings
Windsock frame material

SS AISI 316L
Internal Lighting

Thuba GB 34 20 0385
Power supply

12-370 VDC, 85-265 VAC
Obstruction light

EatonAB50 SPG1N
Compliances

UK CAP 168, UK CAP 437, Atex zone 2 ATEX/IECEx II 3 G Ex nA IIC T5

Related products