HA-80 RG SS Windsock assembly internally lighted LED
Stainless steel, Marine version
Description
HA-80 RG SS Windsock assembly internally lighted LED.
Holland Aviation is making this assembly out of Stainless Steel 316 and therefore suitable for every windsock size and also for Marine and Off-Shore use.
The windsock is internally lighted by LED’s and therefore it has a variable power input range from 90 Vac up to 240 Vac.
You can also buy the HA-80 RG SS unlighted.
Some key features of the HA-80 RG SS Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- It has low maintenance costs.
- This windsock assembly has a low power consumption.
- a tilt-able mast therefore that it is easy to replace the windsock.
- a reliable fixed illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings
This assembly does fit the following windsocks:
Ø300 x 1200mm
Ø700 x 2000mm
Ø300 x 1500mm
Ø700 x 2000mm reinforced leather mouth
Ø300 x 1800mm
Ø900 x 3600mm
Ø400 x 2500mm
Ø900 x 3900mm
Ø450 x 2450mm
Ø900 x 4500mm
Ø500 x 1500mm
Ø1000 x 5000mm
Ø500 x 1500mm with push button Ø18” x 8ft (FAA size 1)
Ø600 x 2400mm
Ø36”x 12ft (FAA size 2)
Ø600 x 3000mm
Ø36”x 8ft
Ø650 x 3000mm
Or any other custom made size
The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
Mast support material | SS 316 |
---|---|
Mast material | SS 316 |
Mast length | 4800 mm |
Mast diameter | Ø 76,1 mm |
Swivel Bearings | 2 Heavy Duty Stainless Steel Bearings |
Windsock frame material | SS AISI 316L |
Internal Lighting | High power LEDs |
Power supply | 6,6A, 90-240VAC |
Power consumption | internal light 12 Watt LED, Obstruction light 5 Watt LED |
Compliances | ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR |
- Secure payment
- Very competitively priced
- Fast delivery
- Standard shipping rates in Europe. Delivery outside Europe? Request a quote.
Description
HA-80 RG SS Windsock assembly internally lighted LED.
Holland Aviation is making this assembly out of Stainless Steel 316 and therefore suitable for every windsock size and also for Marine and Off-Shore use.
The windsock is internally lighted by LED’s and therefore it has a variable power input range from 90 Vac up to 240 Vac.
You can also buy the HA-80 RG SS unlighted.
Some key features of the HA-80 RG SS Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- It has low maintenance costs.
- This windsock assembly has a low power consumption.
- a tilt-able mast therefore that it is easy to replace the windsock.
- a reliable fixed illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings
This assembly does fit the following windsocks:
Ø300 x 1200mm
Ø700 x 2000mm
Ø300 x 1500mm
Ø700 x 2000mm reinforced leather mouth
Ø300 x 1800mm
Ø900 x 3600mm
Ø400 x 2500mm
Ø900 x 3900mm
Ø450 x 2450mm
Ø900 x 4500mm
Ø500 x 1500mm
Ø1000 x 5000mm
Ø500 x 1500mm with push button Ø18” x 8ft (FAA size 1)
Ø600 x 2400mm
Ø36”x 12ft (FAA size 2)
Ø600 x 3000mm
Ø36”x 8ft
Ø650 x 3000mm
Or any other custom made size
The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
Mast support material | SS 316 |
---|---|
Mast material | SS 316 |
Mast length | 4800 mm |
Mast diameter | Ø 76,1 mm |
Swivel Bearings | 2 Heavy Duty Stainless Steel Bearings |
Windsock frame material | SS AISI 316L |
Internal Lighting | High power LEDs |
Power supply | 6,6A, 90-240VAC |
Power consumption | internal light 12 Watt LED, Obstruction light 5 Watt LED |
Compliances | ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR |