HA-80 RG Ex Windsock assembly internally lighted 85-265 VAC
Explosion proof, Zone 1
Description
HA-80 RG Ex Windsock assembly internally lighted 85-265VAC
Holland Aviation is making this assembly out of Stainless Steel 316 and it has an explosion-proof internal lighting and top light.
You can also buy the HA-80 RG Ex 12-370 VDC.
Some key features of the HA-80 RG Ex Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- It has low maintenance costs.
- This windsock assembly has a low power consumption.
- a tilt-able mast so it is easy to replace the windsock.
- a reliable fixed illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings.
Our windsocks are designed so that they taper from the throat to the trailing end causes the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
| Mast support material | SS 316 |
|---|---|
| Mast material | SS 316 |
| Mast length | 4800 mm |
| Mast diameter | 76,1 mm |
| Swivel Bearings | 2 Heavy Duty Stainless Steel Bearings |
| Windsock frame material | SS AISI 316L |
| Internal Lighting | Thuba GB 34 20 0385 |
| Obstruction light | EatonAB50 SPG1N |
| Power supply | 12-370 VDC, 85-265 VAC |
| Power consumption | internal light 20 Watt LED, Obstruction light 5 Watt LED |
| Compliances | UK CAP 168, UK CAP 437, Atex zone 2 ATEX/IECEx II 3 G Ex nA IIC T5 |
- Secure payment
- Very competitively priced
- Fast delivery
- Standard shipping rates in Europe. Delivery outside Europe? Request a quote.
Description
HA-80 RG Ex Windsock assembly internally lighted 85-265VAC
Holland Aviation is making this assembly out of Stainless Steel 316 and it has an explosion-proof internal lighting and top light.
You can also buy the HA-80 RG Ex 12-370 VDC.
Some key features of the HA-80 RG Ex Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- It has low maintenance costs.
- This windsock assembly has a low power consumption.
- a tilt-able mast so it is easy to replace the windsock.
- a reliable fixed illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings.
Our windsocks are designed so that they taper from the throat to the trailing end causes the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
| Mast support material | SS 316 |
|---|---|
| Mast material | SS 316 |
| Mast length | 4800 mm |
| Mast diameter | 76,1 mm |
| Swivel Bearings | 2 Heavy Duty Stainless Steel Bearings |
| Windsock frame material | SS AISI 316L |
| Internal Lighting | Thuba GB 34 20 0385 |
| Obstruction light | EatonAB50 SPG1N |
| Power supply | 12-370 VDC, 85-265 VAC |
| Power consumption | internal light 20 Watt LED, Obstruction light 5 Watt LED |
| Compliances | UK CAP 168, UK CAP 437, Atex zone 2 ATEX/IECEx II 3 G Ex nA IIC T5 |