HA-120 RG Windsock assembly internally lighted LED
Basic and internally lighted
Description
HA-120 RG Windsock assembly internally lighted.
Holland Aviation manufactures this assembly in our factory in the Netherlands. The mast support is made of galvanised steel while the mast is made of T50 aluminium
The HA-120 RG is available Unlighted, externally, double lighted and solar.
Some key features of the HA-120 RG Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- This installation has low maintenance costs.
- This windsock assembly has a low power consumption.
- Tilt-able mast for easy replacement of the windsock
- A reliable illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings.
The Colours red/white (ICAO) or orange (FAA), double-stitched with a reinforced front hem and grommets. Our windsocks are designed so that they taper from the throat to the trailing end, as a result, the windsock is fully extending when you are exposing it to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves are proving to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
Foundation material | Galvanized steel |
---|---|
Mast support material | Galvanized steel |
Mast material | T50 aluminium |
Mast length | 4800 mm |
Mast diameter | Ø120 mm |
Windsock frame material | SS AISI 316L |
Swivel Bearings | 2 Heavy Duty Stainless Steel Bearings |
Ingress Protection | IP 65 |
Ambient Temperature | -40˚ C to + 60˚ C |
Power supply | 6,6A, 90-240VAC |
Compliances | FAA AC 150/5345-27, ICAO Annex 14 Vol I, ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR |
Related products
-
HA-80 RG Windsock assembly externally lighted LED
Read moreBasic, rigid externally lighted
-
HA-120 RG Windsock assembly internally lighted LED 6,6A
Read moreBasic and internally lighted 6,6A
-
HA-80 RG SST Windsock assembly unlighted
Read moreStainless steel 316
-
HA-80 FL SST Windsock assembly internally lighted LED
Read moreStainless steel 316, internally lighted
- Secure payment
- Very competitively priced
- Fast delivery
- Standard shipping rates in Europe. Delivery outside Europe? Request a quote.
Description
HA-120 RG Windsock assembly internally lighted.
Holland Aviation manufactures this assembly in our factory in the Netherlands. The mast support is made of galvanised steel while the mast is made of T50 aluminium
The HA-120 RG is available Unlighted, externally, double lighted and solar.
Some key features of the HA-120 RG Windsock assembly are;
- The windsock gives a reliable wind direction.
- Along with the wind direction, you can see a wind speed indication.
- This installation has low maintenance costs.
- This windsock assembly has a low power consumption.
- Tilt-able mast for easy replacement of the windsock
- A reliable illumination system.
- The assembly has no rotating electric parts.
- Holland Aviation is not using any mercury-containing slip-rings.
The Colours red/white (ICAO) or orange (FAA), double-stitched with a reinforced front hem and grommets. Our windsocks are designed so that they taper from the throat to the trailing end, as a result, the windsock is fully extending when you are exposing it to a wind of 15 knots (is equal to 28 km/hr or 17 mph).
The HA windsock sleeves are proving to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.
Additional information
Foundation material | Galvanized steel |
---|---|
Mast support material | Galvanized steel |
Mast material | T50 aluminium |
Mast length | 4800 mm |
Mast diameter | Ø120 mm |
Windsock frame material | SS AISI 316L |
Swivel Bearings | 2 Heavy Duty Stainless Steel Bearings |
Ingress Protection | IP 65 |
Ambient Temperature | -40˚ C to + 60˚ C |
Power supply | 6,6A, 90-240VAC |
Compliances | FAA AC 150/5345-27, ICAO Annex 14 Vol I, ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR |
Related products
-
HA Windsock 30 x 120 cm
€47,25Select optionsReplacement windsock, metric size
-
HA Windsock 30 x 150 cm
€47,25Select optionsReplacement windsock, metric size
-
HA-80 FL Ex Windsock assembly internally lighted 230 Vac
Read moreExplosion proof, Zone 1
-
HA Windsock 60 x 240 cm
€98,00Select optionsReplacement windsock metric size