Holland Aviation
Request quote
Home Shop HA-80 FL SST Windsock assembly internally lighted LED
HA 80 FL SS Light

HA-80 FL SST Windsock assembly internally lighted LED

 Stainless steel 316, internally lighted

Add to quote

Description

HA-80 RG SST Windsock assembly internally lighted.

Standard supplied with 20 cm (7.9 inch) short mast. A long mast is optional.

The reliable illumination system has no rotating electric parts or slip-rings. Due to its unique design maintenance cost and power consumption are low. The tillable mast structure enables easy replacement of the windsock.

 

The HA-80 RG SST is also available unlighted

Holland Aviation uses the finest European materials available for their windsock assemblies

 

Some key features of the HA-80 RG SST Windsock assembly are;

  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a reliable illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-ring.

 

The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

 

Where to use windsocks

Datasheet

Additional information

Mast material

SS AISI 316
Mast length

4800 mm
Mounting Flange

SS 316
Ingress Protection

Obstruction light IP 65
Power supply

6,6A, 90-240VAC
Compliances

ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR

Related products

  • Secure payment
  • Very competitively priced
  • Fast delivery
  • Standard shipping rates in Europe. Delivery outside Europe? Request a quote.

Description

HA-80 RG SST Windsock assembly internally lighted.

Standard supplied with 20 cm (7.9 inch) short mast. A long mast is optional.

The reliable illumination system has no rotating electric parts or slip-rings. Due to its unique design maintenance cost and power consumption are low. The tillable mast structure enables easy replacement of the windsock.

 

The HA-80 RG SST is also available unlighted

Holland Aviation uses the finest European materials available for their windsock assemblies

 

Some key features of the HA-80 RG SST Windsock assembly are;

  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a reliable illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-ring.

 

The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven to withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

 

Where to use windsocks

Datasheet

Additional information

Mast material

SS AISI 316
Mast length

4800 mm
Mounting Flange

SS 316
Ingress Protection

Obstruction light IP 65
Power supply

6,6A, 90-240VAC
Compliances

ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR

Related products