HA-80 RG Windsock assembly unlighted

Basic, rigid and unlighted

Description

The HA-80 RG Windsock assembly is unlighted.

You can also buy the HA-80 RG externally lighted and internally lighted.

We use the finest European materials available for the making of our windsock assemblies

 

Some key features of a HA-80 RG Windsock assembly are;

  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a tilt-able mast therefore that it is easy to replace the windsock.
  • a reliable fixed illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-rings

 

 

The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

 

datasheet

Where to use windsocks

For more products

Additional information

Foundation material

Galvanized steel

Mast support material

Galvanized steel

Mast material

T50 aluminium

Mast length

4800 mm

Mast diameter

Ø 80 mm

Windsock frame material

SS AISI 316L

Compliances

FAA AC 150/5345-27, ICAO Annex 14 Vol I, ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR

  • Secure payment
  • Very competitively priced
  • Fast delivery
  • Standard shipping rates in Europe. Delivery outside Europe? Request a quote.

Description

The HA-80 RG Windsock assembly is unlighted.

You can also buy the HA-80 RG externally lighted and internally lighted.

We use the finest European materials available for the making of our windsock assemblies

 

Some key features of a HA-80 RG Windsock assembly are;

  • The windsock gives a reliable wind direction.
  • Along with the wind direction, you can see a wind speed indication.
  • It has low maintenance costs.
  • This windsock assembly has a low power consumption.
  • a tilt-able mast therefore that it is easy to replace the windsock.
  • a reliable fixed illumination system.
  • The assembly has no rotating electric parts.
  • Holland Aviation is not using any mercury-containing slip-rings

 

 

The taper of the windsock is from the throat to the trailing end designed to cause the windsock to fully extend when it is being exposed to a wind of 15 knots (is equal to 28 km/hr or 17 mph).

The HA windsock sleeves have been proven withstand wind speeds in excess of 145
km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV
resistance and colorfastness by an independent laboratory.

 

datasheet

Where to use windsocks

For more products

Additional information

Foundation material

Galvanized steel

Mast support material

Galvanized steel

Mast material

T50 aluminium

Mast length

4800 mm

Mast diameter

Ø 80 mm

Windsock frame material

SS AISI 316L

Compliances

FAA AC 150/5345-27, ICAO Annex 14 Vol I, ICAO Annex 14 Vol II., UK CAP 168, UK CAP 437, EASA ADR